While using any type of advanced devices, many of them require proper care and attention. You can use a lens brush , a lens cleaning solution and a lint free cloth. They made your lens very clean and you can use wipe your lens gently, from the center out, using cellular motion. Therefore, in that way, the system can continue to work as it did at the beginning. It is the same case with projectors since their placement varies a lot depending on where you place them. Therefore, their functionality may also differ depending on where they are placed. The following are steps that need to be followed in order to clean the lens of the projector.
It is possible that they may hang from the ceiling as time passes due to their location. There is a greater likelihood that the image will be interfered with by dust particles, and these particles must bit is not recommended to use compressed air as propellant as it may damage the Compressed air is not recommended as propellant as it may damage your lens.
There is a misconception that viewing quality lowers with the passage of time in projectors, but this is not true. Here I am to resolve the issue of how to clean my projector lens. There I will discuss how to enhance the quality of the image by cleaning the projector lens. As a result, following the steps in sequence will result in the best-quality view.
Here are the material you must need to obtain before you can cleans your projector that are easily available:
- lens brush
- cleaning paper
- lens cleaning solution
- lint free cloth
- Manual lens blower
How to Clean my Projector Lens Properly – Step by Step Guide.
Here are the few steps that you need to follow in order to fix the cleaning of projector:
- Unplug the Projector
Usage of a projector can make it very much hotter as the amount of light passing from the very light space will make it very hot, So it is preferred you need to unplug or power off and remove it from ceiling to make it easy to clean.
- Open the lid of Projector
It is very easy to remove the cover of the projector that only requires you to open the nuts that will be very visible with the tool. Afterwards, you can easily interact with the interior of the projector.
It is an easy process to remove the dusk you want to make sure you are not just blowing the dusk back into your projector. Wipe away any visible dirt or dust with a microfiber cloth before you introduce any moisture into the cleaning process.
- Wipe all the Dust Particles
Now you can easily interact with all the internal components of the projector as Lens is our main item. Now take lens-cleaning paper and remove all the dust particles that are viewable on the lens. After that close the lid.
Note: Here is one thing to keep in mind don’t use spray any liquid directly that will be endup malfunctions the projector, In order to use it put it on the lens-cleaning paper and then wipe
all the dust.
- Cleaning exterior
There is a possibility that there are still dust particles on the external side of the projector, So it is recommended to use that lens-cleaning paper with the cleaning liquid and wipe all the dust. That will make the projector shine like pretty new with the improved image view.
Warnings will cleaning
Never use the flammable cleaning material to clean the projector as it will heat up while using, If you use that type of cleaning material that will end up burning the projector. That will cause so much trouble so keep in mind never use flammable material to clean the projector.
You need to be Cautious about:
Dont :
- Use glass cleaner or any type of hard material.
- Use canned air, because that may leave that behind.
- Touch Lens directly with your hand, that may leave marks.
When should I Clean my projector?
Cleaning the projector is important and needs to be done once every 3-4 months as that time may be low or high depending on the area where you are living, as if you are near somewhere to open fields where air may bring dust particles faster. As it is not recommended to open everyday and start cleaning that will damage the Lens ending up lowering the image quality.
What things to keep in mind when clean a projector:
Since you are the only one who can clean your projector lens, keeping your projector lens clean can make a huge difference in the quality of the images. You should avoid sanitizing your projector lens incorrectly so as not to damage the glass or electronic components inside it. It is the same principle that applies to TVs and other electronic devices.
Can Dust Particles affect the quality of view by projector?Definitely yes, as if anything comes in contact with the lens the image quality will definitely effect that will lead to blurry view that is definitely undesirable. So you need to stop the dust particles from affecting the view of the projector.
Can I prevent my projector from dust particles?
Yes, By the instruction given by the manufacturer that you need to cover the lens with lens-cover if you are not using it in a while .There are really only one way of stopping dust from getting on your projector lens, and that’s using the lens cap every time you are not using the projector .The placement of the projector plays a very vital role in terms of interaction of lens and dust particles, So placing it in the living room will give the best performance in comparison using it out-door .Leave your house for a long vacation and look at how much dust your electronics have collected. The longer your projector glass is exposed, the more dust going to collect. It really is that simple.
Final Words:
Cleaning your projector lens is a simple , easy and cost effective method. cleaning the projector in routine (upper given time span) in 3-4 months is really good for long life of projector and better usage. This process is simply, free of cost and enhances the life of the projector. By following all the given instructions there will be no issue in watching TV on projector.
Read Also: